Why is the solid wood floor deformed

2022-07-22
  • Detail

Why is the solid wood floor deformed? Generally, the most common phenomenon in the use of solid wood floors is that the floor is tile shaped or arched, which is caused by the damp of the floor. The reasons for the damp of the floor are roughly as follows: (1) moisture in the air (such as huangmeitian). (2) The floor is not completely dry, and the keel is reinforced with cement. (3) Keel and rough floor are too wet. (4) Use water-based glue. (5) There is no special moisture-proof treatment in the humid environment such as the first floor. (6) Stone floor and floor phase

why is the solid wood floor deformed? Generally, the most common phenomenon in the use of solid wood floors is that the floor is tile shaped or arched, which is caused by the damp of the floor. The reasons for the damp of the floor are roughly as follows: (1) moisture in the air (such as huangmeitian). (2) The floor is not completely dry, and the keel is reinforced with cement. (3) Keel and rough floor are too wet. (4) Use water-based glue. (5) There is no special moisture-proof treatment in the humid environment such as the first floor. (6) The section where the stone floor meets the floor is not closed. (7) Blisters (such as broken water pipes, balcony water backflow, etc.). In addition, the product itself and improper construction will also cause arching. For example, improper drying treatment, insufficient curing, too low moisture content, too shallow back groove, insufficient expansion joints during construction, too tight laying, etc

成都癫痫医院

上海耳鼻喉医院

贵阳精神医院

西安心理医院

Copyright © 2011 JIN SHI